Ask Experts Questions for FREE Help !
Ask
    BarbieA60's Avatar
    BarbieA60 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 8, 2011, 12:03 PM
    Looking for standyne shower control plate replacement
    We are looking to replace the shower control plate in our bathroom. Where can we find these replacement?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Nov 8, 2011, 01:14 PM
    Hi Barbie

    I believe stanadyne was purchased/merged with MOEN years ago (1956).

    Give them a call at 1800BUYMOEN and you should be able to e-mail them a couple plictures of your TRIM PLATE and they can tell you if they have a replacement available. All Home depots that I know of carry a basic moen replacement trim plate but if yours isn't basic (hard to say unless you can post a picture here) then your best bet is still to call moen and see if they can help directly, OK?

    Good luck!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sill plate and rim joist replacement [ 2 Answers ]

I have about 25 feet of sill plate and rim joist to replace as a result of termite damage. I am currently remodeling the outside of my older home by removing all the vinyl siding and the original wood lap siding beneath it and coming back with 1/2 inch foam board insulation, Tyvek, and finally...

Moen replacement shower head/temp control [ 1 Answers ]

Hi. I am remodeling my bathroom. The Moen faucet is from 1997 and I need a replacement trim kit in oil rubbed bronze. Where can I find this so it fits and I don't have to have a plumber come out and tear up the walls/tile to make a new one fit? The shower works fine. I saw one trim kit at Home...

I need the replacement thermostat cover plate T80av100b [ 1 Answers ]

I need the cover plate for the itt Thermostat. The catalog no t80av100b. For use with millivolt... whatever that means. All I am looking for is the cover plate, mine is full of paint from years gone by. Where can I find this item?

Cutting for renovation shower plate [ 4 Answers ]

I was going to change a couple of three handle shower valve to a single handle and not open up the back walls. One is tile the other is a fiberglass tub. I was wondering what was the best means in each case to cut the oval for the plate in fiberglass and to cut tile. Also any particular shower...

View more questions Search