Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Junction box cover plate seal
[ 4 Answers ]
My question concerns sealing a box cover to the junction box. I saw reference to this on a home improvement show. Also, some junction boxes are visible on the lower level near the parking garage of the building where I work, and I can see some type of sealer that oozed out between the box and...
Junction box cover plate
[ 3 Answers ]
I recently bought some 4” square junction box cover plates, made by Raco. As I was installing them I noticed one side was stamped (into the metal) “underside”. Never seen this before. Is this something new? Am I missing something here, or is this just possibly part of the manufacturing process? ...
My garbage disposal is leaking from electrical cover plate. Is it fixable ?
[ 2 Answers ]
My garbage disposal is leaking from electrical cover plate. Is it fixable ?
Drain Cleanout cover plate won't stay on
[ 5 Answers ]
I have a cleanout plug behind a finished wall in my bathroom. There is a Steel coverplate covering the cleanout. One night I noticed while the washer was draining I heard a jingling sound. It turns out that the screw holding the cover on had rusted out. Basically the setup is the screw goes... View more questions Search
|