Ask Experts Questions for FREE Help !
Ask
    rashidmuturi's Avatar
    rashidmuturi Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Nov 6, 2011, 11:51 AM
    Diagnosing a motherboard/powersupply for faults
    The two things that make me sweat when looking for problems in a computer are the power supply and the motherboard.is there a way to eliminate /isolate these problems so that you don't mistake a power supply fault to be a mother board fault display as in the case of a blank display where everything else is okay and you are left with two suspects that is the power supply and the motherboard?
    Scleros's Avatar
    Scleros Posts: 2,165, Reputation: 262
    Hardware Expert
    		  
    #2

    Nov 6, 2011, 07:15 PM
    Power supplies can be field checked with a simple tester (Example: COOLMAX PS-228) or replaced with a known good supply.

    A POST (Power-On Self Test) card (Example: StarTech PCI Post Diagnostics Test Card) can be installed to see where POST is hanging. Motherboard components can also be visually inspected for signs of failure. Leaking and vented capacitors have been an issue last few years.
    aymantn's Avatar
    aymantn Posts: 11, Reputation: 1
    New Member
    		  
    #3

    Feb 1, 2012, 12:40 PM
    Power supply repair tips:
    Power supply repair tips: http://www.smpstroubleshooting.com/
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshoot showers faults? [ 0 Answers ]

Hi I have a Triton opal shower and recently it is playing up as the shower is turned on the setting turns to the cold .I have tried several times turning it off and on again but to no avail .It has three heat settings but is always turning to the cold setting ,please can you help me ? Sadie

How to diagnosing air conditioning faults in trucks involving fuel pressure timing? [ 1 Answers ]

How to diagnosing air conditioning faults in trucks involving fuel pressure timing?

Electrical faults [ 1 Answers ]

Is it an electrical fault that is causing the smell coming from the light when I switch it on?

What does Automatic Transfer PowerSupply mean [ 2 Answers ]

Hi. I recently purchased an Automatic Transfer type power supply which can deliver 0 to 30 volts DC. What does this mean? How do Automatic Transfer power supplies work? Just curious. Can't find answer on Google.Thanks.

Faults is A/Cs [ 1 Answers ]

1.What are the possible causes of compressor heating? 2.What are possible causes of loss of lubrication? 3.What are the symptoms (sign) of broken compressor valves (using system vital sign Discharge pressure, discharge, Temp.Section Pressor.Section Temp.Amp. :o Please ans these question...

View more questions Search