My ac and emergency heat work but when I have ts set to auto and heat nothing happens

Check out some similar questions!

A/C or Heat does not work w/thermostat set "on" or "auto". [ 22 Answers ]

A/C or Heat doesn't work in "on" or "auto". Fan will not come on at the "on" position either. I changed the batteries in the thermostat. I also read somewhere to disconnect the "Y" and hold it to the "R" on the thermostat for two minutes. That will tell me if the thermostat is the problem. ...

Central heat will not turn on if thermostat is set to auto. [ 0 Answers ]

When I turn my thermostat to the "on" mode the heat works fine. When it is set to "auto" it does not come on. I can hear it clicking on and off as I move the lever to set the temp, but it does not actually come on. Its electric. It works fine with the AC in both "auto" and "on" mode. Any...

Nordyne blower motor will not start with a call to heat when set on auto. [ 8 Answers ]

I have a nordyne eletric furnace , my blower motor will not start when set on auto with a call to heat. The elements will heat up but the motor will make humming sound and will start if I push wheel with my hand.I have checked the motor it is fine .

Fan Auto function not working with emergency heat [ 1 Answers ]

My heat pump outside unit is out and I switched over to emergency heat on my thermostat. The heat comes on but the fan will not work in AUTO mode, I have to run the Fan in ON mode. Do you know what my problem might be? Outside unit: My outside unit had a wire that was corroded/burned in to....

Why will our emergency heat not work? [ 1 Answers ]

We have a Ruud model (-)PKA heat pump. It is currently 22 degrees outside, and our heat will only get to 65 degrees in the house, even with the thermostat set on 72. The fan never stops running and if you switch it to emergency heat the air is not warm that comes out of the ducts. I tried to get...

View more questions Search

Check out some similar questions!

Add your answer here.