Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Is Schedule 40 conduit appropriate for main feed wires into a 220 amp service panel
[ 4 Answers ]
I was told by a industrial plant electriction that schedule 40 was not exceptable and I must use schedule 80 pipe to my panel from the meter housing, but that does not seem to be correct for residential? I have visited many new construction projects in m,y area that all have used schedule 40 AND...
Size of Conduit and Wire for 200 Amp Service
[ 1 Answers ]
I have 200A service entrance main circuit breaker,what would be the appropriate size of cable and conduit should I use?
What size EMT conduit is required for 200 Amp service wiring?
[ 1 Answers ]
What is the necessary EMT conduit size for 200 amp service wiring?
200 amp service 4/0 ser cable in 2" conduit?
[ 1 Answers ]
What should I run from my disconnect switch to my panel box inside for my 200 amp service. I have 2" PVC ran from the disconnect to the panel. I thought about using 4/0 SER but then read somewhere that you are not suppose to put it in conduit because of possible temp problems? Is this correct or...
Flexible conduit for service line?
[ 2 Answers ]
I'm an owner-builder and am getting ready to run a service line to a house I'm building. Rather than deal with schedule 40, which doesn't allow much flex, I'd like to get some of the flexible conduit that the electric companies use. I'm figuring this is a 2 inch line. What is this material... View more questions Search
|