Ask Experts Questions for FREE Help !
Ask
    handymanjd's Avatar
    handymanjd Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 25, 2011, 10:17 AM
    In-Sink-Erator Pro 17 won't work!
    My pro 17 is loose at the bottom and moves it was frozen, the reset button dose not stay engaged. I tried disenageing the ring inside maybe that will work do you think?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Oct 25, 2011, 12:50 PM
    Hi handyman and welcome to The Plumbing Page on AMHD.
    You piggybacked on a 2 year old dead thread so I gave you one of your own. Before you post look in the upper left hand corner for the date..
    Are you saying you messed with the locking ring and now the entire unit is loos? Is it still frozen" n Can you explain with more details? Back to you, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

In Sink Erator pro 17 won"t work! [ 34 Answers ]

I have a Pro 17 in sink erator that was in the house we just bought, won't spin. I know this model you put the plug in , spin it ,and it should work, but does nothing. Tested power to the unit and that's fine. Any other things I'm forgetting? Thanks a lot!!

In Sink Erator pro 17 won"t work! [ 4 Answers ]

My problem or maybe his problem, either the stopper contacts are worn or the unit that holds the magnets are worn. Over the years it is harder and harder to activate, now it is about impossible to find the right spot to get contact... I don't know if the stopper is worn or the body in the sink.. ...

My in sink erator won't shut off. [ 4 Answers ]

I have a Pro 17 in sink erator and when we take the plug out the unit won't shut off. We have to unplug it to shut it off. I called a plumber and he said it sounds like it needs a new switch. Who can I contact to fix this problem?

In-sink-erator dishwasher/where do these wire leads go? [ 0 Answers ]

Hi - Just acquired a free, working (but older) In-sink-erator Classic Supreme dishwasher. Problem is, when the owner un-installed it, a few lead wires became unattached from their posts, and I'm not sure which goes where. These are not the main power . Basically, on the rear of the...

In sink erator wiring diagram [ 0 Answers ]

We just replaced our Badger Model 1-81 in sink erator with one purchased at Home Depot. We failed to write down the wiring diagram on the Badger before removing the electrical cord. Now we don't know exactly how it goes. The cord from the Badger has two black lines and one green. Can you help


View more questions Search