 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Harbor Breeze remote control fan/light.
I have two Harbor Breeze fans. Both have their own remote. They were in the house when we bought it in 2006.
The lightbulbs burned out (as they do occasionally) and we replaced them as normal. Both remote batteries needed to be replaced as well (9v). So replaced those as normal as well. Now the light will not come on in either fan. The remote control shows the little icon running up and down the % brightness. The fan speed function still works properly. Just no light - in either fan. I have removed and replaced the bulbs several times to make sure they are in properly. Turned on and off the main switch. Jiggled the wiring inside the glass a little bit. Even tried cussing at them and praying about it. Any suggestions besides caving in and calling Harbor Breeze? Thanks Kathy |
||||
Check out some similar questions!
My harbor breeze fan light does not work with the remote or wall control. We have replaced the receiver, rehooked it up to all the wires coming from the house but only the fan works. We can control the fan speed. When we press the light button on the wall and remote it flashes red. Please...
I have 2 harbor breeze fans with no wall switch, no pull chain, one light was working, I replaced one light and now neither light works. I replaced both bulbs again and still doesnot work, the fans work. Is it the remote or the receiver?
I have a harbor breeze fan remote control. The button for the light only turns the light on and off. The display shows 22% and the light is very dim. How do I get the light to 100%?
I have a Harbor Breeze ceiling fan with remote control dimmer for the light and 3-setting fan control. My halogen light burned out. When I replaced the bulb with the same specs, the dimming function on the remote control no longer worked (though the fan settings on the remote control still work...
I have read the other posts on this subject, but my problem is a bit different: The light on/off and dimmer is working fine from the remote, but the fan speed is stuck on High, and the fan can't be turned off (except from the wall switch). So, the remote is working, somewhat. Any advice? ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
