Ask Experts Questions for FREE Help !
Ask
    popskull's Avatar
    popskull Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2011, 01:49 PM
    What colour wire should be use to coinnect to the photocell neutral
    What colour wire should be use to coinnect to the photocell neutral
    popskull's Avatar
    popskull Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Oct 20, 2011, 01:50 PM
    What colour wire should be use to coinnect to the photocell neutral
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Oct 20, 2011, 03:22 PM
    Can you maybe give us some more detail?
    Where is this photo cell?

    What is your location (country)?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Misuse of ground wire as neutral return wire in old house [ 5 Answers ]

Here a problem where the "obvious" solution scares me, need some advice on how to best proceed. My home (built 1920 with knob and tube type wiring) has been upgraded over the years by prior owners, but in many place still has active current in the old wires, in other places it is spliced into a...

How do I wire a photocell [ 5 Answers ]

How to tell which wire is the hot wire, neutral wire and ground wire [ 10 Answers ]

Timer with no neutral through Photocell. [ 6 Answers ]

I usually use a Time clock for this, but the inwall Timer was preferable, With both in series it allows lights to go on when Dark, no matter what the time of year/daylight savings, and have the timeclock set for 3:00 or any time that is for sure light out, and have the timer turn light off at...

Neutral wire is hot(has voltage potential like the black wire) [ 5 Answers ]

Hi, The problem started at midnight last week. One of my line in the basement is starting to have issue whenever I connect a water pump or appliances to the outlets. Before I plug the appliance in, the neutral is neutral(zero voltage), but when I plug the appliance in, the neutral is now...

View more questions Search