Ask Experts Questions for FREE Help !
Ask
    CarrierHelp's Avatar
    CarrierHelp Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2011, 10:08 PM
    Trouble installing Carrier thermostat- please help
    Hello,

    I am trying to install a carrier 33cs051-fs thermostat. It is replacing a york 2th11702224a (actually a honeywell). It is a heatpump. Below are images of the original wiring and my options for the carrier. As it sits now, when I flip the breaker back on, the carrer thermostat comes alive for about a second and then turns off. Flipping the breaker off and then on again a few seconds later results in the same thing. Any help would be greatly appreciated. The one assumption I made was that x on the Honeywell was C on the carrier...

    Image 1 Original wiring


    Carrier1


    Carrier 2
    CarrierHelp's Avatar
    CarrierHelp Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Oct 19, 2011, 10:15 PM
    It appears my images did not load. Here they are in a web album

    https://picasaweb.google.com/100881641194281730377/Desktop#

    Thank you.
    JonesHVAC's Avatar
    JonesHVAC Posts: 173, Reputation: 12
    Junior Member
    		  
    #3

    Oct 20, 2011, 06:02 AM
    Upload a picture going back to the terminals to your unit please. Heat Pumps are an entirely different breed, not as simple as a furnace and a/c. Thank you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a new Hunter 44155C thermostat and am replacing an old carrier thermostat [ 0 Answers ]

The old Carrier has a wiring code as follows: C= Brown W2 = White R = Red E= Blue G= green O = Orange Y = Yellow According to the Hunter instructions I am uncertain about the O and the E ? Can you help?

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Wiring codes from old Carrier thermostat to new Hunter thermostat [ 1 Answers ]

WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...

Trouble installing a new home thermostat [ 1 Answers ]

I am having trouble installing a new home thermostat. Any help would be apperciated. I am going from a Robertshaw 9420 to a Hunter 44260. My AC unit is a Goodman CPLE30-1A which I think is a single stage heat pump but I'm not positive. Both thermostats say they run off 24V. The wires coming...

Trouble installing honeywell thermostat [ 6 Answers ]

I have a very old thermosat that has six wires hooked up to it now. It is labeled 2-white wire 0-brown wire B-blue wire R-red wire Y-yellow wire G-green wire The honey well thermostat I bought has 5 connections Rh, Rc, W, Y, G with it only having 5 and my current has 6 is this thermostat...

View more questions Search