Ask Experts Questions for FREE Help !
Ask
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #1

    Oct 16, 2011, 04:57 AM
    Hanger Bolt Work Fine, But
    Hanger bolts zinc worked just fine. Now I wonder being outside in the element
    That the threads may get corroded. Maybe I could spray them with a rust inhibitor.
    Or use those protective caps. Any ideas
    pearldiver's Avatar
    pearldiver Posts: 9, Reputation: 2
    New Member
    		  
    #2

    Oct 17, 2011, 01:05 PM
    Try the blue color wheel bearing grease. Just a little bit on the threads. It's thicker and will last longer. That is what I use.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

My kitchen faucet does not work but was fine the day before? [ 2 Answers ]

Its been snowing for a week now. Not sure if that's the problem. But every other faucet works in the house even on the same floor.. the bathroom on the main floor's faucet works but the toilet is a different story.The heater also runs constantly and it's a scorcher in the house.. I'm very confused....

A/C and heat don't work, blower works fine [ 0 Answers ]

Turned on my A/C and soon found out it wasn't blowing cool air, then tried the heat and that did n kick in ether, the blower works fine, and the thermostat turns off and on the blower fine, MODEL: Carrier 40AQ024300BU

Will a c-6 bolt up to a 7.3 diesel. Will it work, how about the torque converter? [ 0 Answers ]

I have a 1992 f-250 ext. cab, 2wd,7.3 liter diesel. The 4 spd. Electronic o.d. transmission is no good. Will a c-6 trans bolt up to the motor? Will it work? Are the Torque converters the same? I realize I may have to move trans support, lengthen drive line, etc. Can you help me find some answers?

Some programs will not connect, but all browsers work fine [ 2 Answers ]

I recently purchased a Zune, with the Zune software everything works, until I try to sign in. I figured out that the problem is that the software just can't connect to the internet. The same is true with the instalation of other windows software that needs a connection to install. I have windows XP...

A/C seems to work fine but inside house is humid [ 2 Answers ]

I have a 15 month old Goodman 2 ton package unit (13 seer). Unit seems to work fine. But lately, the inside of the house seems humid all the time. Everything is sticky, and the air is humid and not dry like it should be. What should I look for to solve this problem?

View more questions Search