Ask Experts Questions for FREE Help !
Ask
    hetrick19psf's Avatar
    hetrick19psf Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 16, 2011, 03:06 PM
    Operate a furnace without control board
    I have a bryant furnace can I get this to run without the control board seeing how the board in there is bad I've asked others but get different answers can I wire the furnace without this control board in it it's a 325878-751 board.
    JonesHVAC's Avatar
    JonesHVAC Posts: 173, Reputation: 12
    Junior Member
    		  
    #2

    Oct 16, 2011, 04:01 PM
    A furnace needs the control board to operate properly. Aside from normal operation there are safety features on furnaces to keep the homeowner and their children safe from harm. Remember that you are dealing with natural gas and could cause an explosion resulting in serious injury... possibly death. If you do not have the appropriate experience please contact a qualified technician to service your furnace. We will try and help as much as possible without jeopardizing the safety of you or your loved ones.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bad Furnace Control Board? [ 6 Answers ]

I have a Carrier 58PAV that intermittently aborts or sometimes clicks on and off at the draft blower stage. I found out I can move the control board (HK42FZ007) when the blower motor clicks off, and it clicks and comes right back on. If I hold it just right, the furnace starts and if I manage to...

No status light on furnace control board [ 3 Answers ]

I have a goodman Board number 1012-930 or B18099-05 The status light is off and the machine will not do anything. I have 24 AC going to the board when the door switch is made. Is there a print of the board or does the status light off mean its dead?

Control board rheem furnace [ 1 Answers ]

We purchased a new controlboard for our rheem furnace but it is not exactly the same and the wiring diagram is not matching up like the old one, for instance with the old one the heat and cold wires are black and blue on the new one the diagram says balck and red. Why is it different, and is there...

Testing control board on heil furnace [ 5 Answers ]

I have 110 volts going into smart valve but no voltage comeing out to blower motor. Could a bad control board cause this or is it the smart valve ?

Furnace control board [ 2 Answers ]

Can the board be repaired or do I need to replace it

View more questions Search