Ask Experts Questions for FREE Help !
Ask
    creddragon's Avatar
    creddragon Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 15, 2011, 02:49 PM
    L130 John deere mower not engaging deck when pto knob engaged
    The engine runs fine for as long as I want it to until I pull that knob. Then it sounds like it want s to work and just dies. The belts don's spin at all when thi is occurring. Primary wheel located beneath the engine which drives the belts doesn't seem to spimove the belts. I am considereing removing the belt from that wheel to remove the load to see what happens but removing and putting the belt back on has always been a pain in the butt for me. Want to eliminate all other possibilities befprehand.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Oct 15, 2011, 06:24 PM
    Check under deck make sure thers nothing stuck on the blades.
    Luck
    creddragon's Avatar
    creddragon Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 17, 2011, 11:16 AM
    I already checked that first. There's nothing stuck in or around the blades.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere L130 deck won't engage [ 5 Answers ]

I have a John Deere L130 lawn tractor and when I pull the PTO switch to engage the deck the mower tries to die and won't engage the deck. Could it be that the PTO switch is faulty and needs to be replaced or is it something else that's wrong ?

John Deere L130 riding mower won't stay running [ 7 Answers ]

We only have about 30 hours on this 1.5 year old garden tractor, as it only really needs to be used about once a year when the wild grasses are very tall and they're getting quite brown and becoming a fire hazard. Thus, it had been sitting unused for a few months when I tried to start it to move...

John deere l130 mower [ 2 Answers ]

The fuse blows when I engage the mower deck New battery new fuse new switch I don't know

Mower deck belt routing John Deere 420 - 50inch deck [ 3 Answers ]

Hi - I am looking for help on the routing for deck belt for John Deere 420 with 50 inch deck. Any help would be appreciated. [email protected] Thank you ! Steve

John Deere L120 - engaging mower deck stall tractor [ 1 Answers ]

When I engage the mower deck on my JD L120, this one is from a JD not Lowe's or HD, the tractor stalls. Manually pulling on the belts I am able to turn the blades. Tractor is 3 years old and used for residential moving.

View more questions Search