Ask Experts Questions for FREE Help !
Ask
    mikey007's Avatar
    mikey007 Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2011, 05:19 PM
    Why did my heat pump stop working after replacing squirrel cage in my gas heating
    Unit? My central\ cooling\heat pump does not come on when I turn on cool
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Oct 14, 2011, 07:39 PM
    You gave us very little info. Will any thing work? Heat, or blower if you turn thermostat fan switch to on or is it the outside unit will work but no blower? If the blower works in heat and when you turn thermostat fan to on, I would say you have a bad connection on the cooling speed on the blower. Give as much info as you can. Make and model of your system will help.
    JonesHVAC's Avatar
    JonesHVAC Posts: 173, Reputation: 12
    Junior Member
    		  
    #3

    Oct 15, 2011, 07:49 AM
    Yes, please post additional information as T-Top requested and try to be a bit more specific so we can help you. Thank you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat Pump A/C not working after Replacing Honeywell T841A w/Hunter 4460 [ 1 Answers ]

Heat seems to work fine, although fan continued to run after outside unit shut down and heat always seems to use heat strips in air exchange unit. A/C will not turn on at all, heat pump or fan T841A 44660 R to RH O to Y/O W2 to W/B (W2 jumped to E)

Heating efficiently in 2 zones - heat pump and gas [ 2 Answers ]

I live in a 2 story (plus basement) single family home and am trying to determine the most efficient (energy and cost) way to heat my home in cold weather. I have 2 heating/cooling zones - a gas furnace which heats the basement and first floor, and heat pump for the 2nd floor, where the bedrooms...

Heat Pump Stop Working. [ 1 Answers ]

Dear, My Heat Pump has suddenly stopped working even though we set the thermostat in Heating mode. When I hit the contactor to test the compressor, it ran fine. So, there is obviously nothing wrong with the compressor. What are the possible causes of the problem? My stat is the Vision Pro 8000 and...

View more questions Search