Ask Experts Questions for FREE Help !
Ask
    lippend's Avatar
    lippend Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Apr 23, 2009, 06:02 AM
    Heat Pump A/C not working after Replacing Honeywell T841A w/Hunter 4460
    Heat seems to work fine, although fan continued to run after outside unit shut down and heat always seems to use heat strips in air exchange unit.

    A/C will not turn on at all, heat pump or fan

    T841A 44660

    R to RH
    O to Y/O
    W2 to W/B
    (W2 jumped to E)
    G to G
    Y to Y1
    X not connected to 44660

    Possibly jump RH to RC?

    any help will be appreciated!
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Apr 23, 2009, 01:21 PM

    Yes the rh and rc need to be jumped for the ac to work. We will need more info to find your heat strip problem
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Help to replace thermostat Honeywell T841a for Hunter 44155c [ 1 Answers ]

Hi, I am trying to replace my T841a 1712 Non-Programmable Heat Pump Universal Thermostat for a Hunter Model 44155C, but I can't make the new unit work.:confused: The Honeywell thermostat has the following connections: Color Cable Terminal Blue -----> X Red -----> W2 ...

New Honeywell Thermostat for Heat Pump and Gas Furnace - not working [ 5 Answers ]

We recently bought a Honeywell RTH7400 for our home with a Goodman cple30-1 Heat pump and a Janitrol Gas furnace. I hooked it up according to the Honeywell instructions. C to C G to G Y to Y O to O/B R to RC with jumper to R W2 to Aux with jumper to E I set it to 7 on function 170...

Replacing Thermostate by Hunter 44260 (on Heat Pump) [ 2 Answers ]

Hello all. I currently have a Thermostate White-Rodgers that I would like to replace by the Programmable Hunter 44260. Current wiring: C = Blue W2 & E JUMPED = White R = Red G = Green O / B = Orange Y = Yellow

Replacing an old Honeywell Thermostat with a Hunter Model 44260 to a York Heat Pump [ 0 Answers ]

I have an older Honeywell thermostat with wiring G(green) W(white) R(red) X(blue) B(black) O(orange) & Y(yellow). My new programmable thermostat Hunter 44260 has G R/C R/H Y/O W/B & Y1. Which wires go where on the new 44260 thermostat? The manual is not easy to understand. Thanks! D

Replacing old heat pump thermostat with Honeywell RTH3100C [ 1 Answers ]

I have a Rheem heat pump with auxiliary and emergency heat. My current thermostat is a Seco TA-2000 with the following wiring configuration: B W2 X R G and a piece of wire connected between E and W2. There's also an orange wire that's not connected to the thermostat. The Honeywell manual does not...

View more questions Search