Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
60 AMP feeder line to meter and from meter is 200 AMP wire to my electrical box.
[ 13 Answers ]
I have a old 60 AMP feeder line from the top of my house to the meter. From the meter is 200 AMP new wire. I was wondering if this is even safe and what would the cost be of updating the feeder line?
Installing 200 amp disconnect switch below meter - options
[ 7 Answers ]
I am about to have power connected to a house but have noticed the jacket on the service entrance cable is starting to fray. I was looking at the possibility of installing a disconnect switch below the meter and running new wire from the disconnect switch to the main panel. Can I install a...
200 amp safety disconnect vs. 200 amp breaker
[ 1 Answers ]
I am in the planning stages of installing an automatic transfer switch for my house-Asco 225 amp". While doing this I was going to upgrade my 100 amp service to a 200 amp service. I was also thinking during this upgrade I would like to have some sort of disconnect between the meter and my automatic...
400 amp service, 2 200 amp panels, 320 amp meter socket
[ 10 Answers ]
Hi, this is my first post here, but I have been reading a lot and have already learned a bunch. I want to thank TK already and hope you reply to this. I am in the process of designing my electrical system for my new home. I have some electrical experience, but am by no means a pro. I am...
2 200 amp disconnects and a 200 amp meter
[ 3 Answers ]
On a new house I have 2 200 amp panels on the inside. What will be the best way to hookup the 2 200 amp outside disconnects and meter to look decent for the house?:o View more questions Search
|