Ask Experts Questions for FREE Help !
Ask
    hardhat77375's Avatar
    hardhat77375 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jan 14, 2009, 04:38 PM
    200 amp safety disconnect vs. 200 amp breaker
    I am in the planning stages of installing an automatic transfer switch for my house-Asco 225 amp". While doing this I was going to upgrade my 100 amp service to a 200 amp service. I was also thinking during this upgrade I would like to have some sort of disconnect between the meter and my automatic transfer switch, Just in case repairs have to be done without having to call the electric company. A Couple of supply houses recommended using a panel with a 200 amp breaker. I was wondering if a 200 amp safety switch would be better? Possibly a fusible safety switch?

    Just to advise everybody I am not an electrical Person. I plan to have all work done by liscsensed electricians. Just trying to find some ohnest advice on doing the right thing.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Jan 14, 2009, 08:04 PM
    A breaker and enclosure is what you'll typically see in this situation. That's what I'd use. ;)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Main disconnect breaker kAIC ratings? [ 4 Answers ]

Can I use a 10 kAIC main breaker in a main disconnect or does it have to be a 35 kAIC main breaker? I have a 10 kAIC, 225 amp breaker on hand, and I did not want to have to buy a new 225 amp 35 kAIC breaker if I did not have to. My indoor load center has a 10kAIC, but the outdoor, main disconnect,...

Bathroom GFI outlet trips breaker at breaker panel [ 2 Answers ]

Hello all. Our house is approximately 13 years old. Each morning when both the iron and blow dryer is plugged into two separate GFI outlets in the master bathroom, the circuit will trip the 15 amp breaker in the breaker panel. Is it possible to upgrade the breaker to a 20 amp without...

200 amp breaker/disconnect [ 2 Answers ]

I'm needing wiring help. I am wiring a mobile home and at the service pole I'm not wanting to hang the 200 amp breaker box since it's over one foot long and would like to hang a much small box w/ only a lone breaker or disconnect before going to the 200amp breaker panel mounted else where. ...

Main breaker and main disconnect [ 2 Answers ]

What I have is a home built in 1960 moved in 2 years it had a meter hanging from the rear of house with no main, 240v 50amp circuit to stove, 240 30amp to dryer, 5 breakers for the rest of house 1 20amp and 4 15amp. What my plan is to replace the meter housing and put a g.e. 200amp Disconnect on...

View more questions Search