Ask Experts Questions for FREE Help !
Ask
    zapato's Avatar
    zapato Posts: 2, Reputation: 1
    New Member
     
    #1

    Oct 8, 2011, 02:50 PM
    XB80 Gas Furnace , furnace fires up fan turns on but no airflow in ducts
    Furnace fires up just fine, and fan spins but there is absolutely no airflow in duct work. Any ideas?

    Last spring thermostat went out and I replaced it, worked great. A month later circuit board burned out, tech found that problem and replaced it (major pocketbook ouch) and everything worked fine. Month or so later fan quit working no issue it was now summer. Unplugged fan gave it a separate power source and it worked. Plugged it back in and it now works. However there is absolutely no airflow in duct work.

Check out some similar questions!

I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts [ 1 Answers ]

My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it's just the burners that turns off after a few seconds. If I try turning the furnace on and off a few times it sometimes fires up and stays on. I have tried...

I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts [ 0 Answers ]

My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it just the burners that turns off. If I try turning the furnace on and off a few times it sometimes fires up and stays on.

Intertherm furnace gas turns off before fan [ 4 Answers ]

I have an intertherm furnace, and sometimes it cycles just fine, while other times it will do this: Ignition coil warm up Gas turns on and starts to warm up furnace Gas cuts off just as blower winds up Blower runs, blowing cold air through the house Blower stops Then this cycle repeats...

New gas furnace- not enough airflow to heat house. [ 1 Answers ]

I replaced the original forced air oil furnace (circa 1985) with the new gas furnace about a year ago and it simply isn't moving enough air to heat my 2-story 2400 sq ft house. Additionally, a part (forgive me, I don't know exactly which one) keeps failing and the company keeps replacing it (they...

Gas furnace fan turns on but nothing comes out [ 1 Answers ]

When I turn on my gas furnace, the pilot light comes on, but goes off afer a couple of minutes after having produced nothing. When I turn on the manual fan, it starts up, but no air comes out. Any ideas? Thanks


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.