 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Why isn't my thermostat wires labeled?
I'm installing a hunter 44668 thermostat in my camper but when I removed the original thermostat there's only 3 wires hooked to it and there not labeled. The only labeling is under the terminals. 12v- = White wire, COMMS = Orange wire, 12v+ = Red wire. I need help figuring out which wire should go were on my new hunter 44668 System. Any help would be greatly appreciated!
|
||||
Check out some similar questions!
I have a white, yellow orange, blue, red, and a green wire. Where do these wires connect on a ritetemp 6200. My wires are not labeled and I have no clue. Thanks!
Hello, We just moved into a foreclosure house that the thermostat was missing. I believe it controls both cooling and heating. There are four wires: white, blue, black and orange. Can someone help me to identify them please? I've called three technicians and no one wants a small job as to...
I am trying to install a programmable thermostat (Honeywell RTH6300B) to replace an existing round Honeywell non-programmable thermostat. The wires on the existing thermostat are not labeled and there are only 2 wires attached (green and yellow). There is a red wire that is taped off. The new...
Honeywell mercury thermostat has no wiring labels cooling has 1- blue 1- red 2- yellow heating has 2-yellow 2- white 1- red. Trying to install hunter digital 44860
I have an old GE motor I pulled off a planer and want to use on a jointer, but need to switch directions. There is a barely legible wiring diagram on the back side of a cover, but the wires aren't numbered and the current wiring doesn't match up with the diagram. There are 9 wires and I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
