I have a ritetemp 6200. My wires are not labeled what wire connects to what

Check out some similar questions!

What is the proper way to wire all wires? [ 2 Answers ]

Im installing a Hunter celing fan and light control model 27182. The switch is equipped with four wires including one black, one blue, one red and one green. On the wall there are a total of 6 wires and a bare wire, 3 black and 3 white. The wires shows as follows: two black wires and two white...

How to install thermostat without the wires labeled [ 2 Answers ]

Hello, We just moved into a foreclosure house that the thermostat was missing. I believe it controls both cooling and heating. There are four wires: white, blue, black and orange. Can someone help me to identify them please? I've called three technicians and no one wants a small job as to...

Installing RTH6300B with wires that are not labeled [ 2 Answers ]

I am trying to install a programmable thermostat (Honeywell RTH6300B) to replace an existing round Honeywell non-programmable thermostat. The wires on the existing thermostat are not labeled and there are only 2 wires attached (green and yellow). There is a red wire that is taped off. The new...

Ritetemp 6080 and the C wire [ 12 Answers ]

I have a SunTherm Electric heat and air system in my apartment and just bought a Ritetemp 6080 to replace the old out of date thermostat. In order to use the remote and other features you have to have the C wire connected and my system doesn't have that running through the wall. Does anyone know...

GE motor wires aren't labeled [ 20 Answers ]

I have an old GE motor I pulled off a planer and want to use on a jointer, but need to switch directions. There is a barely legible wiring diagram on the back side of a cover, but the wires aren't numbered and the current wiring doesn't match up with the diagram. There are 9 wires and I...

View more questions Search

Check out some similar questions!

Add your answer here.