Ask Experts Questions for FREE Help !
Ask
    banjoman15's Avatar
    banjoman15 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 1, 2011, 02:04 PM
    Uneven Snapper 33" deck ! Why does it scalp !
    My Snapper 33" ZTR has a deck that scalps the grass on the right side, but doesn't on left side. I can't seem to find the correct adjusters. The chains in the rear seem to do little for this. What is up here?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Oct 1, 2011, 02:30 PM
    Tire pressure.
    Bent blade
    Bent mandrell.
    These are a few things that cause it.
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wood deck between uneven areas [ 1 Answers ]

I have a 6 foot dirt area between my concrete pool deck and a second slab of cement. I would like to build a wood deck to concrete the two slabs of cement. The only problem is that the second slab is lower than the first.how can I connect the two uneven slabs with the deck

How do build a deck over uneven concreate patio. [ 4 Answers ]

Hi, I'm trying to find information on how to build a deck over and uneven concreate surface, I have minimal height from the concreate to the door of the house approx 20cm there for am unable to use bearers and joists plus decking surface, are there any tips out there. I would be greatfull for any...

Wood deck over broken, uneven concrete patio [ 2 Answers ]

I have a broken and uneven concrete patio - I don't want to remove it - I want to cover it with a wood deck... it is fairly stable - can I just put in small posts and level it and use it as a base for the new patio ?

Deck cutting uneven [ 1 Answers ]

Mower is mowing uneven. Left blade is cutting about half an inch to three fourths of an inch lower than the right side on a lt1000 craftman mower. How does one adjust the blace height or the mower deck to make both sides cut at the same height?

View more questions Search