Ask Experts Questions for FREE Help !
Ask
    jabu42's Avatar
    jabu42 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 26, 2011, 04:51 PM
    Gzs-6 switch?
    I need to purchase a three speed revolving switch. Information on switch is: GZS-6 E218247 2.5A250VAC/5A125VAC.
    Can you tell me if there is a supplier who I can contact for this purchase?

    Thank you

    JB Creel
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Sep 28, 2011, 07:27 AM
    Did a quick webserach and found this among others:

    Zhongshan Yongjiang Plastic Electrical Appliances Company
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I replaced pull switch lights with recess but the wall switch won't turn off the light [ 2 Answers ]

I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...

Swapping Dual Light Switch for Dimmer/Three Position Switch for Ceiling Fan [ 1 Answers ]

I am trying to swap out a dual switch for a switch that has a dimmer for the ceiling fan light and a three position switch to control the fan. The original wiring had white to white on switch, black to black on switch, and one black from light connected to the top switch pole and the other black...

Separate Fan light switch, fan switch and switch for can lights to one location [ 2 Answers ]

I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.

York residential furnace pressure switch problem code stuck switch [ 1 Answers ]

I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals

Connect a port on a remote switch to a secure segment on the local switch [ 4 Answers ]

I have 2 Netvanta 1224R switches. On the main switch I have 3 Vlans setup. Vlan1 = main network (example IP 123.231.5.1) Vlan2 = Web Access (Example IP 69.115.851.202) Vlan3 = Secure segment (Example IP 123.231.8.1) On the remote switch I have 1 Vlan. Vlan1 = Main network (example IP...

View more questions Search