Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have a single handle Delta tub faucet w/o a shower. Diverter engaged.. Disengage?
[ 2 Answers ]
I have a single handle Delta tub faucet w/o a shower. The faucet diverter for the non-existent shower has become engaged, the ring at the spout exit. With the pressure diverted to the non-existent shower, how do I get the pressure back to the spout? I've tried messing with the ring but to no...
Under faucet shower diverter not working
[ 4 Answers ]
My shower diverter suddenly quit working today. It is the type that you pull down from the underside of the faucet. You pull down but it does not stay in place, just pops right back up. The water pressure is strong enough so it should stay put. Any ideas?...
Moen shower faucet diverter
[ 4 Answers ]
The diverter on our Moen showertrol single handle faucet does not pop in and out as it should--I have tried to grease it but to no avail. Should the diverter be replaced and if so how? Thank you.
Shower/Tub Faucet Diverter?
[ 5 Answers ]
While running my tub faucet, if I turn the temp handle to the middle, the shower runs as well. The diverter is on the tub faucet position. How do I get the shower not to run?
Diverter stem installation - three handle shower & tub faucet
[ 4 Answers ]
The house is well over 25 years of age and I have replaced both hot and cold water valves and tub faucet without removal of bath and shower stall tiles - still look good. Purchased a diverter stem (Galtmaster tub and shower models - 1963 to 65). With the old diverter I would turn clockwise to have... View more questions Search
|