Ask Experts Questions for FREE Help !
Ask
    Sljudson's Avatar
    Sljudson Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Sep 19, 2011, 10:39 PM
    PTO switch stuck in engaged position
    The mower starts and runs but cannot move PTO switch from engaged position. How can I fix this? 917.255913 Craftsman

Check out some similar questions!

Can an electric clutch on a yth2148 Husqvarna lock up in the engaged position [ 1 Answers ]

When trying to start the mower the blades are trying to turn but the starter is not strong enough. When I took the primary deck belt off engine started fine. So the clutch is stuck in the engaged position even with the pto switch off. How can I unstick it or what should I try.

Honda 3011 starts but dies when chifted into gear or if pto engaged [ 1 Answers ]

Honda 3011 starts but dies when shifted into gear or if pto engaged

MTD 42 inch Yard Machine Engine with PTO engaged [ 4 Answers ]

I have a 42 inch MTD Yard Machine lawn tractor. This is the 3rd season for this mower. Sunday I was cutting the grass as usual, everything was normal when the engine began to miss out and sputter, it sounded like it was going to backfire. It acted like it was running out of gas. I pulled over by...

Cub Cadet engine cuts out when PTO engaged [ 2 Answers ]

Model 2415, engine cuts out when PTO switch is engaged, OR, when simply taking it out of park and pressing on the forward pedal. Any ideas? Thanks!

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.