Check out some similar questions!
Intertherm furnace/ac won't shut off in heat or cool mode even with t-stat disconnectd
[ 1 Answers ]
I disconnected the t-stat wires and it still runs all the time whether in heat or cool mode. It blows heat and cool properly, just won't shut off... have to kill the breaker. Any ideas would be great. Thanks a million, Murfdogger
How to wire electric on E3EB-015H
[ 5 Answers ]
The old furnace had 4 ac wires. 2 coming off a 60 amp from breaker box and 2 coming off 2 thirty amp tied together in breaker box. The new furnace a Miller (Nordyne) has 4 lugs. The top is empty, second one down has a 60 amp breaker, third is empty and fourth has a 60 amp breaker. It came with a...
New Compressor Run OK. HVAC Fan only run in Heat mode.
[ 15 Answers ]
This board is awesome. I have done some reading first on here. Here's my case: Compr runs fine. Fan on HVAC blower inside runs only in Heat mode. Not on Cool. Not even on "FAN-ON" as opposed to FAN-AUTO. Can this be an issue with relay and board within HVAC? Per other thread, it was talking...
Diconnect Intertherm FEH 015H
[ 2 Answers ]
I cannot pull out the Disconnect on the lower right side of the inside heating unit of the Intertherm FEH 015H 017H. Does it come completely out? Could it be stuck? It doesn't seem to budge and I'm not that much of a weakling. Thank you for any information. Patt aka pattusa
Fan runs forever when in heat mode but not in ac mode
[ 2 Answers ]
Great web site and concept!! I have a York forced air gas furnace that has a Honeywell Fan Limit switch. The unit works great in the summer. The ac and the fan shut off correctly. However, in the winter the heat will reach its temp setting and turn off but the blower continues forever. I have... View more questions Search
Add your answer here.
|