 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Harbor Breeze Remote Control Fan?
I have two fans with remotes in one room. Is it possible to control them separately. One is over the Kitchen and one over the dinning table. We don't always want them on at the same time. Currently one remote is working both fans at the same time. Thanks Richard
|
||||
|
||||
|
Richard,
This is a simple fix if both the remote and the receiving unit in the fan are "Switch Selectable". Look on the remote, you should see a block of about four switches. They will all be in one direction either up or down. Here's what you do. Leave one fan unchanged. On the other fan, change the switch settings to Up-Down-Up-Down. Now set the switches in the same manner on the receiving unit in the fan. This will changer the frequency selection on the 2nd. Fan. |
||||
|
||||
|
Don's correct so I hope you still have both remotes. I am sure there are fans with 4 dip switches but I regularly see them with up to 7 switches. Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Our fan or light will not work with our remote control. We have changed the light bulb and the battery in the remote
I have 2 harbor breeze fans with no wall switch, no pull chain, one light was working, I replaced one light and now neither light works. I replaced both bulbs again and still doesnot work, the fans work. Is it the remote or the receiver?
I have a harbor breeze fan remote control. The button for the light only turns the light on and off. The display shows 22% and the light is very dim. How do I get the light to 100%?
My light on the fan just comes on just stared to do this no pull chain no switch only remote new battery van works OK light OK does the remote have timmer for light?
I bought a house with a harbor breeze fan with an LCD remote. It's worked fine for quite a while. Recently, though - the remote stopped working for the lights. However, it still works fine for the fan. I've replaced all the bulbs and have manually proved that all the lights work. ...
View more questions Search
|
