Ask Experts Questions for FREE Help !
Ask
    judgeveto's Avatar
    judgeveto Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 4, 2011, 12:41 PM
    How to loosen brass fittings?
    How do I loosen the brass regulator from the babeque grill. I need a new regulatore but the can't remove the old one. Please help
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 4, 2011, 12:45 PM
    Are you talking about the connection to the tank or to the hose? This could be a reverse threaded connection, lefty tighty. Mr. Heater Hose and LP Regulator - 12ft. Length, Model#F273072
    judgeveto's Avatar
    judgeveto Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 4, 2011, 12:54 PM
    Loosen from the hoose
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Sep 4, 2011, 01:09 PM
    Open my link from the last post, most new regulators come out of the box with a new hose attached. What you are working on is regular thread, turn counterclockwise to loosen.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Plastic pipe brass fittings? [ 6 Answers ]

Can I use brass compression fittings with 15mm plastic pipe? Thanks!

How to loosen brass fittings [ 1 Answers ]

I cannot loosen a bathtub faucet with a wrench. Will heat help to loosen the brass fittings?

How to loosen brass fittings on bathtub faucet [ 1 Answers ]

I cannot loosen the brass fittings on a bathtub faucet with a wrench. Will heat help to loosen the fittings?

Brass pex fittings [ 1 Answers ]

Can you reuse brass pex fittings again if the crimp doesn't take? If so , How do you get the crimp off? Thanks beth

Removing brass fittings from Cast Iron pipe [ 3 Answers ]

I need to snake the line under my bathroom sink. The problem is I have a dual sink setup. The vent pipe is also connected there so I have a cast iron cross fitting where the four meet (the two sink drains, the vent pipe, and the drain to the main line). I was attempting to remove one of the...

View more questions Search