Ask Experts Questions for FREE Help !
Ask
    disturbed_styx's Avatar
    disturbed_styx Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 30, 2011, 08:16 AM
    How do I replace the o-ring seal in the lid of a Broaster Model 1800?
    I work at a small restaurant in Ohio that just barely makes it by. I handle most of the repairs myself to save us money and to be able to stay open. The o-ring on our Broaster model 1800 recently began to fall apart. I have already ordered a new ring, and was looking at how to repair it, and think I know what to do but want to be sure. Can anyone help me either tell me step by step or point me to a free repair guide?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 31, 2011, 10:03 AM
    I just look at something like that and figure it out. If you already have an idea about how to do it I would try it. You will see if your idea work when you try to remove the old one. It must fit well to hold pressure. DrTom4444
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to take a drain out of a bathtub to replace the rubber ring seal [ 2 Answers ]

I think the tub is leaking from the drain and waters leaking downstairs I want to replace the rubber o ring seal in the drain

Replace lid switch on whirlpool washing machine model # LSQ9010PW2 [ 2 Answers ]

Washer stopped working. Will fill up but does nothing after that. I was told it is most likely the lid switch so I replaced the lid switch and that did not fix the problem. No matter what setting I use (other than fill), nothing happens -- no noise, no action, nothing. Tried opening and closing...

How do you replace the retaining ring and o ring ( part no. 101879 ) [ 0 Answers ]

I have a leak where the spout and faucet connect, do I need to take the enite faucet of the sink to replace the o-ring?

How to replace a distributor o-ring seal(iirc)on a 93 civic 1.5L [ 1 Answers ]

Aloha! I need to know how to replace a distributor o-ring seal (iirc) on my 93' civic, it has a 1.5L. Is it a simple procedure? Any do's and dont's that I need to know about?

Trane XL 1800 Cond Coil Warr Replace - Am I Being Charged Too Much? [ 1 Answers ]

The condenser coil in my Trane XL 1800 unit was found to be leaking freon. In fact, after being charged, it only lasted one day before the unit was not cooling again. The leak was found on the coil. I was told that the coil itself was covered under my warranty. BUT that I would have to pay for...

View more questions Search