Ask Experts Questions for FREE Help !
Ask
    mhorton's Avatar
    mhorton Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Aug 29, 2011, 02:00 PM
    Where is my cam shaft sensor located?
    I have a 2.7l v6 2003 chrysler sebring that keeps spitting out the code p0340 which supposedly indicates a bad cam shaft sensor . I know that in most cases the cam shaft sensor is fairly easy to replace and the sensor itself is not terribly expensive, but I am in college and have limited funds and would like to replace it myself rather than pay someone for their labor. I checked where I assumed it would be located but would like an answer just confirm my thoughts before I proceed .
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Aug 29, 2011, 04:56 PM
    On the end of the front cylinder head, inline with the camshaft. Coat the O-ring on the new sensor with engine oil, prior to installation. My advice is to go with a BWD sensor, with a lifetime warranty, from AdvanceAutoParts.com. See what it looks like on that site (Part No. CSS901, $18.09), to help you confirm its location on your engine. Easy job.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2003 ford mustang cam shaft sensor [ 1 Answers ]

I have replaced the cam shaft sensor twice and the check engine light still comes on. The computer code still says sensor is bad. What should I do?

99 tahoe cam sensor [ 8 Answers ]

hi this is my first post. I have been trying to find an answer all over and hopefully someone here can help! I have a99 chevy tahoe 4x4 and the code for my camsensor came up. I have changed the sensor and still have the same code. It misses at highway speeds (not continually most when I go up a...

Where is cam sensor? [ 1 Answers ]

Hello , I have a 1997 GMC yukon four wheel drive, 5.7 L. engine, automatic trans. Engine light turned on so I went to autozone for an analysis which came up as being the crank or cam censor, so I bought them both. I know where the crank sensor is but I don't know where the cam censor is. Can...

Briggs & Stratton 98902 - realigning cam shaft [ 1 Answers ]

I have a Briggs & Stratton 98902 and I removed the sump and the cam shaft fell out. How do I realign the cam shaft? Thanks in advance, Kevin

View more questions Search