Ask Experts Questions for FREE Help !
Ask
    david.ahrens's Avatar
    david.ahrens Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 26, 2011, 02:20 PM
    Need 4-speed ceiling fan switch
    I have a Hunter St. Michaels 4-speed ceiling fan. The neck on the 4-speed pull chain switch broke off so I need a replacement switch. The markings on the switch are LJY-280A and E198635. Can't seem to find it anymore to include on the internet. Any suggestions?
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Aug 26, 2011, 04:05 PM
    Have you called up Hunter about this switch? I'm sure this has happened before and they must have some kind of replacement available. If not, then a new fan is your next option.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan speed switch [ 3 Answers ]

Where can I purchase just (1) ceiling fan 3 speed pull chain speed switch ( K.T.E. 308-A) ? The4 fan was made by Hunter.

Ceiling fan switch - 4 speed fan sold by sears [ 1 Answers ]

I pulled the chain out of the switch on my Sears ceiling fan. Any suggestions on where to find a switch replacement or adapt to something else? Sears no longer stocks the part, I have tried Ace Hardware, Home Depot and local ceiling fan store.

Ceiling fan speed switch [ 2 Answers ]

I removed the speed switch without marking which wires went where. It is a Hampton Bay. Any suggestions as to where a diagram or adivce can be found for the wires? Thanks in advance. Edie

How does a ceiling fan five speed switch work? [ 4 Answers ]

Looking for information on how does 5 speed fan rotary switch for a ceiling fan increase and decrease the fan speed at any given time.

Ceiling fan speed switch [ 2 Answers ]

I have a ceiling fan that is approximately 20 years old. I took out the speed control switch, and thought I remembered where the wires went. The switch has two holes per connection. It has Line, 1 2, 3. Apparently I didn't put the wires back correctly. I only get two speeds - high and low. There...

View more questions Search