Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Turning water back on after using bread to help solder the copper pipes
[ 8 Answers ]
Urning water back on after using bread to help solder the copper pipes and some of the faucets are clogged. How can we get the water flowing again through the faucets? This is the hot water side.
Can I solder outlet side of a ball valve if the valve is closed and under pressure?
[ 0 Answers ]
Can I solder outlet side of a ball valve if the valve is closed and under pressure?
Copper pipe to brass valve
[ 10 Answers ]
I have a water softener with a brass valve that the copper water pipe connects to. The copper pipe has a hole in it and needs replaceing. I am trying to remove the pipe from the brass valve but can't get it to loosen. I am using a common small propane bottle with nozzle. Any help would be greatly...
Braze or solder 3" copper water line ?
[ 5 Answers ]
At work we had to fix a buried 3" copper water line, what is the best way to do it brazing or solder?
Solder fittings to Type M copper
[ 1 Answers ]
What challenges do I face if my existing plumbing is Type M? Existing copper is 35+ years old. I purchased Type L copper lines. I don't think my fittings were typed. View more questions Search
|