Ask Experts Questions for FREE Help !
Ask
    Stylz1981's Avatar
    Stylz1981 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 4, 2011, 02:47 PM
    Why Isn't my tank filling up with water?
    Hey I have a question about my toilet tank. I have a fluidmaster and the tank isn't filling up with water preventing me from flushing the toilet the only water that I see is leaking is running down the arm from just under the cap its not pouring just a few drops here and there. There is no water coming out of the refill tube at all not even a drop. So if anyone has any solutions or answers please let me know THANKS
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Aug 4, 2011, 02:54 PM
    Will assume the water is on. Turn the water off. Lift the float arm and twist the top cap to the left. It should lift off. Get a plastic cup, hold it over the riser pipe and turn on the water. This will flush the fil area. If no water is coming out, you have an obstruction in the valve. If water comes out, reinstall the top and turn the water back on.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Aug 4, 2011, 03:48 PM


    Hi guys:

    Check out this video... shows you how to access and replace the fill valve seal that is the most likely issue. In your case, you may be able to simply clean the seal... watch the video.




    Good luck!

    Mark

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why is the cold water line not filling my hot water tank ? [ 5 Answers ]

The cold water supply valve to the water heater is open, but no water is flowing. I opened the drain valve on the heater and no water came out. Obviously it hasn't been filling for the past few days. I have plenty of cold water at all my faucets. I have shut off the breaker.

Water tank not filling [ 11 Answers ]

I recently reinstalled a water tank and pressure switch and the tank doesn't seem to be filling and I have hardly any water pressure. I only get good pressure when the pump kicks in. I also installed a check valve to see if that would do anything.

New Hot Water Heater Wire Panel Filling With Water From Tank [ 2 Answers ]

I have recently installed a new electric hot water heater. I have connected all the wires properly, I have connected the piping in the correct manner, and filled the tank. I was about to flip my breaker to turn the water heater on, and noticed a little moister around the panel that the wires come...

Rainsoft Water Softener - Salt tank not filling with water? [ 1 Answers ]

Put a bag of salt in my softener today and it appeared to be way over the brine level. Checked on it a few hours later and still had dry pellets on top. Manually regenerated the system - no fill. Letting it go through its cycle now, but wondering if there's something I'm overlooking. There's...

Water tank not filling up [ 3 Answers ]

Today, we changed our kitchen sink. We drained the system, connected new taps,sink. Put water back on - first time ever no leaks. So off for a bath! We have no hot water.Having connected the cold valve on the washing machine to the valve on the hot water tap etc. we had a small amount of hot water...


View more questions Search