Ask Experts Questions for FREE Help !
Ask
    aguilareal's Avatar
    aguilareal Posts: 31, Reputation: 1
    Junior Member
    		  
    #1

    Apr 14, 2011, 02:45 PM
    Toyota 4 runner 90 3.0 sensors location
    I'd like to know the name of all sensors location thogeter where the BVSV sensor is located Thanks
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Apr 14, 2011, 04:18 PM

    Does it look like this?

    Thermostat housing sensors
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #3

    Apr 15, 2011, 07:45 AM

    I'm not familiar with BVSV senosr.
    Are you able to retrieve diagnostic trouble codes (DTCs)? What are your symptoms?
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #4

    Apr 15, 2011, 06:41 PM

    It's a Bimetal Vacuum Switching Valve for Evap, temperature gauge sender, the start injector time switch, and coolant temp sensor for EFI.
    aguilareal's Avatar
    aguilareal Posts: 31, Reputation: 1
    Junior Member
    		  
    #5

    Jun 11, 2011, 06:30 PM
    Comment on califdadof3's post
    No it doesn't thatis for toyota supra I need a one for TOYOTA 4 RUNNER 1990 MOTOR 3.0 I REALLY WILL APRECIATE YOUR HELP THANK YOU VERY MUCH
    aguilareal's Avatar
    aguilareal Posts: 31, Reputation: 1
    Junior Member
    		  
    #6

    Jun 18, 2011, 01:11 PM
    Comment on kitch428's post
    Can you swow me a picture of this thermostat housing sensors location
    aguilareal's Avatar
    aguilareal Posts: 31, Reputation: 1
    Junior Member
    		  
    #7

    Aug 2, 2011, 05:14 PM
    Comment on califdadof3's post
    It doesn't thatis for toyota supra I need a one for TOYOTA 4 RUNNER 1990 MOTOR 3.0 I REALLY WILL APRECIATE YOUR HELP THANK YOU VERY MUCH
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #8

    Aug 2, 2011, 06:23 PM

    You can try here and see if that helps.

    Cygnus X1 Home Page
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toyota 4 runner 1991 3.0 [ 3 Answers ]

I installed a new motor 1993 3.0 in my toyo 1991, but I having problems with it the problem is when It is cool It didn't start well until I press the gas pedal several times. after it runs OK I can start it without any problem, I would like to know what is causing the problem, Thanks

Location crank sensor motor 3.0 toyota 4 runner 1990 [ 2 Answers ]

Location crank sensor toyotra 1990 4 runner 3.0

Toyota 4 runner no spark [ 8 Answers ]

Hi, have a 93 4 runner ,6 cyl. All of a sudden won't start. Good fuel replaced igniter and coil ,also coil wire still no spark help please . Thanks

Toyota 4 runner brakes [ 3 Answers ]

I changed the master in my 1997 toyota 4 runner and bleed the brakes and master cyclider and the brake petal still is soft when I brake please help!

1994 toyota 4-runner 3.0 v-6 [ 2 Answers ]

While driving around 50-55 mph the engine has a miss, and sometimes while idleing. I already tried fuel treatment and new plugs,oil changing. The engine does not loose any water or use any oil. Where should I start looking.:eek:

View more questions Search