Ask Experts Questions for FREE Help !
Ask
    lauxjr714's Avatar
    lauxjr714 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 14, 2011, 10:36 AM
    Are there jumpers on a multi hp condenser fan motor to set the hp?
    Just bought a 1/6-1/3 multi-hp motor to replace a 1/5 hp motor. Do I have to set jumpers/wiring to the correct hp? If so, where are they located?
    hvacprof's Avatar
    hvacprof Posts: 9, Reputation: 2
    New Member
     
    #2

    Jul 16, 2011, 08:20 PM
    Who's motor? Make and model? There are numerous multi hp motors out there.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Condenser fan motor [ 2 Answers ]

Why isn't my condenser fan motor not working

Replacing a Rheem 5 wire condenser fan motor with an Emerson 4 wire condenser Fan [ 0 Answers ]

I have a Rheem a/c unit that the fan motor quit. I took all the information off the old motor and went to a local supply store and they cross-referenced the numbers and gave me and Emerson motor. All the specs are the same, 1/5 HP, 1075 RPM, 60 Hz, 1.3 Amp, single phase. When I got home, I took...

Condenser fan motor replacement [ 2 Answers ]

I had to replace condenser fan motor with new and new motor has more wires than old one. Please tell me how should I wire it? The old motor had only 3 terminal. Black was connected to AC circuit board with relay Purple was connected to dual capacitor common Brown was connected to ducal...

Fan condenser motor [ 1 Answers ]

I'm trying to find a specific Emerson cond. Fan motor HQ 1086485EM and have not been able to find on any sites Any suggestions?

Condenser fan motor overheats [ 3 Answers ]

:mad: replaced condenser fan motor that overheated and new motor overheats and thermally shuts down. Also replaced capacitor. The motor is properly grounded and spins in the correct direction. It seems like there still is a voltage problem. Any ideas?


View more questions Search