[ceilingfan99]

Fan doesn't work when receiver is in mix. I have only two wires from ceiling, black and white. I have the white ceiling wire connected to the white (neutral in) wire of receiver. I have the black wire from ceiling connected to black (live in) wire of receiver. I have red wire from receiver connected to black and white fan wire. Black wire from receiver (fan out) to black fan wire. White wire from receiver (common out) to white fan wire. Nothing works. When I bypass receiver fan works. This is the second receiver I have tested. Any Ideas? Thanks,,

[donf]

Are the dip switches on the remote the same as the dip switches on the receiver?

A wire with black and white stripes is normally a Neutral, not a hot wire. Can you get us a picture of the wiring diagram for the receiver?

[hkstroud]

I have red wire from receiver connected to black and white fan wire

Red from receiver should light output . Connect it to the black with white strip which should be input to light.