Check out some similar questions!
Low psi in furnace?
[ 10 Answers ]
How do I adjust the psi in my furnace. Right now the gage is reading 0, when it should be between 12-13. The pipes under the house froze. I was able to get them fixed. But now the psi gage as I said reads zero. How do I correct this issue?
New duel system heat pump fume smell
[ 1 Answers ]
I have just purchase a new lennox xp13 duel system heat pump to go with a lennox oil furnace which has a new heat exchanger. Now the heat pump system seems to work OK on it's own, but went it switches over to the oil furnace the fan continues to run and when the heat comes out of the vents there...
Well pump does not hit 50 psi
[ 14 Answers ]
Hello everyone- I have a 2" 3 year old well pipe that was never used. I have finally hooked up a 1hp above ground pump to it and it pumps water great. I have a 30 gallon bladder tank and a water softner hooked up to it as well. Question: Pump came set at 30-50 psi in and out so I filled...
Very low hot water psi
[ 10 Answers ]
I have an oil furnace with an expansion tank. While having some work done on the furnace, the repair person noticed the flow of the hot water. He said he cleaned something which only took him a few minutes and we had great hot water pressure. Of course it has happened again and trying to work this...
Low H2O psi, remedies?
[ 1 Answers ]
Holding tank alone, holding tank with pump, other solutions?? THanks View more questions Search
Add your answer here.
|