Troy-bilt Model 609 has an Electric PTO that won't engage

swendt Posts: 1, Reputation: 1

New Member

Jul 1, 2011, 09:43 AM

Troy-bilt Model 609 has an Electric PTO that won't engage

How can I check the electric PTO clutch? I can't find a schematic diagram for the mower, only a wiring diagram which is useless.

Check out some similar questions!

Troy Bilt electric pto [ 6 Answers ]

Hi, first time I have posted hope I do it right. I have a 22 hp Troy Bilt garden tractor with an electric pto. My problem is the pto keeps shutting down, sometime I can go for a while other times it will kick out repeatedly. I have tried wiggling the switch and that doesn't seem to matter, also...

Troy-bilt PTO blade engage [ 3 Answers ]

I have a Troy-bilt hydrostate, 46"cut 3 blade lawn tractore w/ a PTO blade engagement. Was cutting and the blades stopped. Everything else works fine and there is nothing hanging or loose that I can see. What do I need to look at before I take it to a shop for repair?

Troy Bilt Electric Clutch pto stops [ 2 Answers ]

Need install tips. I have a project that someone else started and never finished. Need a diagram and advice. Model # 17aa5abp766 Zero Turn. Before he took off the old one and bought the new one the PTO would work for five minutes then stop. Replace the neutal sensors. Still the same problem. Thank...

Troy-bilt mower and electric PTO clutch [ 1 Answers ]

I am replacing the lower drive belt on my 23hp Troy-bilt pedal drive garden tractor. The last step in removing the belt is to remove the hex bolt from the center of the electric PTO clutch. When I try to loosen the hex bolt part of the electric clutch and the engine pulley turns at the same time....

View more questions Search

Check out some similar questions!

Add your answer here.