[chall331]

I have a new goodman circuit board, that only has 3 terminals, the schematic from the door is gone. Where do I connect the yellow t-stat wire to for cooling.thank you

[wmproop]

Yellow wire from the tstat will splice directly to one of the smaller tstat wire that goes outside to your condenser unit

[chall331]

OK but how is the blower motor controlled with the board bypassed? 2nd the wires to the cond unit are colored white and red, normally red is on the common terminal, but there is no common terminal, If I hook up tstat yellow and white to cond where do I hook up red(cond wire) for common? Thanks for the help. I sure appreciate it.

[chall331]

wmproop -ok but how is the blower mtr controlled with the board bypassed? 2nd the wires to the cond unit are colored white and red, normally red is on the com terminal on board if I hook up yel and white wire to cond where do I connect red (cond) wire for common? Thanks for the help Craig.