Ask Experts Questions for FREE Help !
Ask
    hugnaba's Avatar
    hugnaba Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 23, 2011, 04:56 PM
    Trane heat pump troubleshooting?
    Transformer on pole blew, power out. Power came on a day later. Put new AAA's in Honeywell thermostat. Did not have to reset the time. Reset the temp. Outside unit hasn't restarted. No breakers tripped, no fuses blown, outside disconnect not damaged. What's up. Thermostat indicates fan and cooling are on, but no fan and no cooling.
    Thanks
    Joseph
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jun 23, 2011, 05:26 PM
    Possibility that start-up power surge has blown the capicitor in the condenser unit or even the transformer in the furnace/airhandler,, have seen this happen
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane heat pump troubleshooting [ 1 Answers ]

My blower fan on a variable speed heat pump system blows high speed cold air so my body feels cold with the system on and OK with the system off. What causes the system to change speeds... or not?

Trane heat pump troubleshooting [ 1 Answers ]

My compressor will run for a few seconds then shut off the tech reported the pressure was near 700 lbs and recently he replaced the pressure for this same problem he reported the switch was bad due to contamination in the system blocking the switch fom working he said I either need to replce the...

Heat pump troubleshooting trane frayed wires [ 1 Answers ]

I had a squirrel strip off the insulation on most of the wires connecting the thermostat to the outside unit. I separated all to prevent shorts and the heat pump still won't come on. I checked breakers in the box and found one in the inside unit. None were tripped. Anything else I should look...

How to wire a trane 900 series thermostat to a trane XL13i heat pump [ 1 Answers ]

How to wire a trane 900 series thermostat to a five wire XL13i heat pump system.

Trane XL20i heat pump requires Trane 900 series thermostat? [ 2 Answers ]

Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used.

View more questions Search