Ask Experts Questions for FREE Help !
Ask
    greenematt's Avatar
    greenematt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 13, 2011, 05:12 PM
    My Kenmore stackable washer/dryer is broken.
    The washer won't spin during cycle. The water fills and drains just fine and I can hear the motor working, but there is no spin. How do I fix it?
    DocRyan's Avatar
    DocRyan Posts: 19, Reputation: 2
    New Member
    		  
    #2

    Jun 13, 2011, 06:22 PM
    It sounds like you have a bad motor coupling, but a bad transmission can also give the same kinds of systems. The motor coupling is located between the motor and the transmission.

    This is what the part looks like.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Model 417.94712400 stackable washer/dryer; dryer doesn't heat up. [ 4 Answers ]

Dryer drum rotates, and it responds to the "cycles" dial, but the heating element doesn't heat up. Is there a reset button somewhere, or do I need to replace the heating element, OR? Thank you.

Kenmore stackable washer/dryer [ 0 Answers ]

How to close the panel in the front of the unit? I replaced the door switch but can not close the panel door. Help

Kenmore stackable washer/dryer broken. Washer doesn't work [ 0 Answers ]

When starting a wash load on my stackable kenmore washer/dryer it starts to fill with water and it clicks. The lights in my house were dimming off and on and the washer sounds like a car trying to start.

Kenmore stackable washer dryer unit: washer transmission [ 0 Answers ]

I have a 14 year old Kenmore stackable unit, spent several hundred dollars here and there every few years to have the dryer belt fixed, etc. Now the washing machine portion, it will start a wash cycle, then stop, leaving the water to sit in the barrell. A repair guy said its not worth replacing the...

View more questions Search