Ask Experts Questions for FREE Help !
Ask
    bacobits's Avatar
    bacobits Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 10, 2011, 02:57 PM
    How to by pass the reverse kill switch when the pto is engage so I can cut while back
    How to overide the reverse switch on a troy bilt super bronco lawn tractor.

    I know this was answered but I don't see that "yellow" wire. There are 2 yellow wires under the seat?
    Did they change something? Any specific pictures?
    tickle's Avatar
    tickle Posts: 23,796, Reputation: 2674
    Expert
    		  
    #2

    Jun 10, 2011, 03:20 PM

    bacobits, we are all volunteers here, cannot direct you if you didn't get it the first time.
    bacobits's Avatar
    bacobits Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 10, 2011, 05:39 PM
    Comment on tickle's post
    OK I'll look further.
    Thanks!

    D
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #4

    Jun 10, 2011, 09:44 PM

    Its on the shifter lever , when you pull it into reverse it grounds it out.
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere LX172 PTO won't engage [ 15 Answers ]

I have a John Deere model LX172 riding mower. It runs well but I can't get the mower to engage. The main pulley under the motor will not turn. The engine will kill if I turn on the PTO switch while not in the seat so I'm assuming the switch and the safety part of it works. Any suggestions on what...

Troy-bilt PTO blade engage [ 3 Answers ]

I have a Troy-bilt hydrostate, 46"cut 3 blade lawn tractore w/ a PTO blade engagement. Was cutting and the blades stopped. Everything else works fine and there is nothing hanging or loose that I can see. What do I need to look at before I take it to a shop for repair?

John deere 155c pto won't engage [ 5 Answers ]

Okay here goes, my wife was mowing and got of the 155c to pick something up. The tractor died and I found the 20 amp fuse blown, I replaced the fuse twice and the tractor started up, but the mower would not engage. I replaced the electric clutch assembly and plugged it in only to find it still does...

View more questions Search