Ask Experts Questions for FREE Help !
Ask
    callprop's Avatar
    callprop Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 5, 2011, 05:13 PM
    Help! Wiring new thermostat... old Honeywell T834 to Hunter dig/program 44155
    I have an obselete honeywell t834c2499 thermostat & am installing a new hunter thermostat model 44155. Old thermostat has blue wire=B green=G red=R yellow=Y white=W and a red wire jumper between 1 & 2. New stat has Y1, W/B, Y/O. RH, RC, and G with a jumper between RH & RC, directions say to remove the jumper for 5 wire installations, and I have 5 wires. As soon as I think I have it figured out, something throws me & my mind goes to spaghetti-can anyone help? Where do the old wires go? Please-it is hot in Texas & a/c folks are either booked solid or hiding inside in the a/c! :-) any help would be greatly appreciated!
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jun 5, 2011, 05:39 PM
    It's a shame to go through all this and then (if lucky) have to do it all over within 6 months. Take the Hunter junk back where you got it ,pay a little extra and get yourself another Honeywell. You won't have to worry about it for years to come.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Jun 5, 2011, 05:49 PM

    Don't know if it will help much, but Mostlty I see red for power, green for blower, white for heat, yellow and blue for cool.
    valentineque's Avatar
    valentineque Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Jun 9, 2011, 11:08 AM
    Replacing a lenox to a new honeywell RTH2300 can u help?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #5

    Jun 9, 2011, 11:22 AM
    Yes,, turn power off to furnace ,before you start,, next follow instructions that come with honewell
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane weathertron thermostat wiring to a hunter 44155 thermostat [ 0 Answers ]

Wiring a thermostat

Honeywell to hunter thermostat wiring diagram? [ 0 Answers ]

Honeywell to hunter thermostat. Honeywell has RH, RC, Y, G and W. Hunter has a Y1 and Y/O in addition to RH, RC, Y and G. Whch do I attach the yellow to;Y1 or Y/O. and the thermostat says to drop the jumper from RH to RC if using 5 wires, so I did. Is this correct.

Replace a honeywell T87F with a Hunter 44155 [ 1 Answers ]

Curren wiring is configured as yellow wire to Y terminal, orange wire to O terminal, red wire to R terminal, green wire to G terminal and a jumper from the W terminal to the Y terminal. Hunter thermostat has the following terminals G, RC, RH, Y/O, W/B, and Y1 which wire goes where?

Replacing Honeywell with Hunter Thermostat Wiring [ 11 Answers ]

I'm replacing my Honeywell T841A1423 thermostat with a Hunter 44660 thermostat but can't cross reference the wiring references: Honeywell are: W2, W3 G, R, O, Y, X Hunter are: Y1, RH, RC1, RC, Y/O, W/B, G

View more questions Search