Wiring a receptacle and a bathroom fan timer

cormack Posts: 1, Reputation: 1

New Member

Jun 8, 2011, 12:44 PM

Wiring a receptacle and a bathroom fan timer

Wiring a receptacle and a bathroom fan timer

ma0641 Posts: 15,675, Reputation: 1012

Uber Member

Jun 9, 2011, 09:36 AM

Can you please explain your question a bit more? Existing outlet? Existing fan? GFCI?

Add your answer here.

Check out some similar questions!

Why won't my timer switch for bathroom fan won't come on wired like it said too [ 1 Answers ]

Why won't my timer switch come on for the bathroom fan. Not related to light switch

Bathroom Exhaust fan keeps on running, even after removing timer switch [ 2 Answers ]

Bathroom fan kept on running, timer switch didn't make any difference. This is what I did. 1) Turned the power off from the circuit borad. 2) Removed the timer switch, had Black and Red wire, taped them 3) Turned the power on from the main 4) Fan started and didn't stop. Let me know,...

How do wire up a bathroom fan through a GFCI plug to a fan timer switch? [ 1 Answers ]

I am installing a Broan model# QTRE070C ceiling fan in my bathroom. I'd like to wire the fan through the GFCI plug to fan timer switch. The fan isn't going to be directly over the tub/shower enclosure but in the center of the bathroom ceiling. If it's not directly over the tub/shower will I still...

Wiring bathroom fan timer [ 2 Answers ]

I want to put an electronic timer on our bathroom fan. These timers apparently only come in a four wire configuration... which I am not familiar with. I have three wires, black white copper, in my wall box. I don't want to use a dial timer. Is there a way to adapt three wires to four? If not,...

Bathroom fan wiring [ 3 Answers ]

I am finishing a basement 3/4 bath. I have run a separate 20 amp (12g) circuit from panel to GFI outlet in bathroom. From that I want to run to bathroom fan. Can I run to fan and then to switch for the fan or do I HAVE to run the wire to the switch and then the fan - I have been told I must go...