 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cm260 robert shaw?
I am changing a robert shaw cm260 t-stat to a honeywell rth2300. The robt shaw had a red and yellow wire hooked to the A contact. There is no A on the honeywell, where do you hook them up. Or could you say what those wires do? The whole connection was blue wire to B, white to O, green to G, red and yellow to A.
|
||||
Check out some similar questions!
We recently bought a home with a robert shaw 303 thermostat controlling our heat pump and air handler. We had a number of trades in doing some renos and I think they have adjusted the heat. I was leaving set as it was by the previous owner. My concern is that when I look at the display, I don't...
There are two temperatures being shown on the display screen of a Robertshaw 9620 thermostat. I know one of them is the room temperature (larger of the two) but what is the other temperature that is being shown?
Let me start by saying this could either be a thermostat or a heater problem. We have a Maple Chase that's the equivalent of a Robert Shaw 9620. After reading different posts here, I found the correct owners manual online. Our problem is that the heater runs and runs but it's blowing very cold...
Cannot get thermostat to do anything except turn on ?off the fan. Display is flashing. Pressing the light button does not even turn on light
How do I wire up this new Robertshaw 3210 Thermostat? I have a gas, forced-air furnace. The wires coming out of my wall are labeled: RC, Y, W, G. The new Robertshaw 3210 thermostat has these connectors: R, C, L, O, B, W2, E/W1, Y1, G Which wires go to which connectors? Do I need to add some...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
