Ask Experts Questions for FREE Help !
Ask
    jaflaki's Avatar
    jaflaki Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 9, 2011, 07:30 AM
    I have a 3.5 HPcraftsman edger cranks but does not start
    How to connect the springs for choke. They came off when I was trying to clean the carborator
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 9, 2011, 07:51 AM

    To be of any real help you need to give us the Sears model and serial number
    jaflaki's Avatar
    jaflaki Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 9, 2011, 08:25 AM
    The model number is 536-772100.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    May 9, 2011, 09:03 AM

    Well the Sears site is not very helpful. http://www.searspartsdirect.com/part...dMod=536772100 So lets try with a engine brand and model#
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My craftsman 3.5 HP edger (mod # 53677210) will start only after I prime it 15 or mor [ 1 Answers ]

My craftsman 3.5 HP edger (mod # 53677210) will start only after I prime it 15 or more times and then dies after it burns that gas, which takes all of 2 or 3 seconds. Checked the float bowl and it is clean. Put new gas in it, and because it started, I assume that the spark plug and wiring are all...

'97 Civic cranks but won't start [ 1 Answers ]

Hi, The immobilizer icon blinked a couple of times while I was driving (had been raining for two days) and then the check engine light came on. After that the car cranks but won't start. I changed the spark plugs, battery and fuel filter, but those didn't help. Next the car was towed to a...

Cranks no start [ 2 Answers ]

I have a 1997 power stroke diesel engine. I have fuel pressure, It cranks but no start. I can get it to run only with starting fluid. Any ideas as to what is wrong?

Cranks, but won't start. [ 2 Answers ]

I have a 93 Toyota pickup with a 22RE engine. It will crank over perfect but only attempts to start as if it were starving for fuel. It will run on starting fluid, but then dies out.

98 jetta cranks but won't start [ 8 Answers ]

Hey all, Having a bit of trouble with my jetta (2.0L gasoline - 5spd). Great car, but yesterday, I was coming home from work and it quit as I pulled off from a signal light. It will crank, but doesn't start. (bad enough I had to push it out of the #1 lane off to the side of the street in DRESSY...

View more questions Search