Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Polyeurathene over oil based paint
[ 1 Answers ]
I have sanded and painted using an oil based paint a church communion table (needed to make it look like walnut; therefore I used a black and brown). Should I use a coating over it to help it from scratching and resist any moisture?
Oil based boiler needs replacement
[ 1 Answers ]
I have a 1950's oil run boiler system that needs to be replaced in a rental property that I own. Can you please tell me the approximate costs and benefits/energy savings expectations of least cost and highest energy saving options. Is there any tax, insurance or other savings/benefits to going...
Painting Cabinets - Oil based or Water based?
[ 1 Answers ]
Going to be painting my oak kitchen cabinets white. I heard that oil based paint would be best, but don't want to deal with the extra mess. Is there anything wrong with using a good acrylic enamel?
Do Oil Based Stains Void Fire Rating on Cedar Shingles
[ 2 Answers ]
This is my first post on this Board - I appreciate any insight that people might have. We are in the middle of a large remodel and plan to use cedar shingles to side the house. The city that we live in has very strict building codes and we understand that shingles must be fire rated to pass final...
Commercial oil-based v.s artist's oil paint
[ 1 Answers ]
I am painting on interior brick, already painted with oil-base commercial and wish to use commercial oil-base paint because I think it is more durable than artist's paints, i.e. dusted, perhaps even washed. Is there something I can use to thicken it, thus allowing it to work more like artist's... View more questions Search
|