 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton Bay Fan and light
I have a hampton bay fan and light combo. The fan and light work fine and so did the remote up until a few months ago. The remote will only turn on the fan or light if I hold it less than a foot away from the fan... Which defeats the purpose of the remote. Im not sure what to check to try and solve the issue. I have already changed the battery. Thank you for any help!
|
||||
|
||||
|
First thing I would do is contact the manufacturer and see if they will send you a free replacement. If not, you might look for the little "clear" thing at the front of the remote which sends the signal. If the remote has been dropped it might have been moved into the remote and can't get a signal out. Hope this helped.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Hello just bought a house with a hampton bay fan and light, remote control no pull chains. At night the lights will come on without even touching the remote. Also the fan shut itself off last night. What do I need to do?
I installed a new CFL lightbulb, when I turned on the light I heard a pop and smelled something nasty. Afterwards when I turned off the light all the left over light bulbs constantly flicker. They turn on OK but only flicker when I turn them off. By turning off I mean with the remote, but leaving...
Installed fan 3-4 months ago and have had no trouble until past week when light on fan started flashing intermittently. Fan has remote and is wired directly to power source -- no switch. Checked all connections, but cannot figure out why light is flashing. Any help is much appreciated!
View more questions Search
|
