 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Have a rheem criterion 2 gas furnace (1X2000), our gas was out for three days (Tucson Az ) Now it’s back on, and both furnaces start and stop about ever 4 to 10 minutes
RGPH 10 eamer criteryon 2... 100,000 BTU.. 80%... circulating fan working... draft inducer fan on... the gas don't come on.. so... no heat... please help today... please... thank you
I have an older Rheem gas furnace with badly burnt wiring and needing to rewire. I need a wiring diagram
It is now about 57 degrees in my house. My furnace just turned on but there was no ignition, no flame. I could hear the blowers running. Is my flame sensor bad or dirty? Or is it something else? How do I fix this? I have fixed my furnace before with a new flame sensor or something like that. I...
Have a rheem furnace and when it turns on it blows real hard something I read said it has a three or four speed motor just wondering if some one could help me change the wires to lower the speed of the motor
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
