 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas rheem furnace... no heat
RGPH 10 eamer criteryon 2... 100,000 BTU.. 80%... circulating fan working... draft inducer fan on... the gas don't come on.. so... no heat... please help today... please... thank you
|
||||
|
|
|
||||
|
You need to provide more info , it could be flame sensor it could be bad hot surface igniter it could be bad spark ignition control and so on. If you don't know these parts and what they do you probably don't need to be working on your furnace no offence .
|
||||
|
|
| Question Tools | Search this Question |
Check out some similar questions!
I have the Rheem Criterion II furnace. It is working OK. But the blower comes on after the desired temperature reached or it was turned off after a while.However, eventually it will turn off but blows cool air. I just don't know what to do because it blows the cool air. So I shut it down manually...
I have an older Rheem gas furnace, Model RGAA 150C. Tried to turn on the heat this morning without luck. Tried to eliminate the thermostat first as the culprit. Disconnected the thermostat and used a jumper between the red wire and the fan; and between the red and the air conditioner. Both...
I have an older Rheem gas furnace with badly burnt wiring and needing to rewire. I need a wiring diagram
It is now about 57 degrees in my house. My furnace just turned on but there was no ignition, no flame. I could hear the blowers running. Is my flame sensor bad or dirty? Or is it something else? How do I fix this? I have fixed my furnace before with a new flame sensor or something like that. I...
:cool: hi,out there.bob,here in cheyenne,Wyoming.it's christmas day and we have no heat.we have a rheem criterion 2 gas furnace it doesn't have a pilot light .the furnace turns on and the fan blows,but only blows cold air even with thermostat set on heat.can someone out there help us?thanks MERRY...
View more questions Search
|
