 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman powermate 3750
My coleman powermate generator 3750 has no output. I replaced burnt diodes, still no output. I flashed with battery and drill, still no output. Material around stator winding seemed burnt away in areas with those stator windings appearing darker than the rest. How would I test this stator, and if I replace it should I expect it to happen again on a generator that has only run for about an hour or two. Thanks
|
||||
Check out some similar questions!
Coleman powermate generator 3750w wireless-no output already, tried flashing with 12v volt battery, and by rotating chuck on drill. One diode was burnt out, so I replacrd both without any success. Capacitor does't look swollen although parts of the stator winding are darker than others. Any ideas?
The engine starts and runs well but the generator does not produce any electricity. Interally there are no brushes so I assume it is one of the brushless type. There are 3 windings on the stator one feeds a 12 micofarad capacitor and the other 2 supply power to the two outlets via a cicuit...
My generator won't start. I used sta-bil fuel treatment and then stored it for 3 years. I drained the fuel out of the tank and carb bowl (it was dark yellow) and added fresh fuel. When I try to start it, nothing happens, I pull and pull until fuel comes out into the air cleaner. (flooded) What do I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
