Ask Experts Questions for FREE Help !
Ask
    jesskahle's Avatar
    jesskahle Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 25, 2011, 09:37 AM
    Cheshire fan cover hitting blades- help!
    We installed a Harbor Breeze Cheshire Fan and our problem is that when the fan spins the blades hit the cover making quite a loud noise. We have tightened the blades and have checked all screws, its all mounted properly but cannot figure out what is wrong. Please help
    MCM232's Avatar
    MCM232 Posts: 8, Reputation: 1
    New Member
    		  
    #2

    Mar 26, 2011, 09:42 AM
    I had a similar problem with a ceiling fan that stumped me for a while. After checking everything I finally found that one of the screws inside the housing was too tight and caused the outer housing to bow just enough to make contact with the blades. Everything else about the install looked fine and I didn't see the bowing until I got high enough on the ladder so that the fan was at eye level.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why are the mower blades hitting each other while engaged but not when disengaged [ 3 Answers ]

Why are the mower blades hitting each other while engaged but not when disengaged. The mower is a cub cadet RZT 50.

How much ar fan motor blades [ 0 Answers ]

How much ar fan motor blades, mine are stuck on the shaft and having difficulty removing. Used WD-40 on the shaft and left for 2 hours, kept re-spraying the WD40 in between time

Ceiling fan blades catch on casing for light below. Can I adjust blades to raise them [ 1 Answers ]

Hi. I installed my Kendal ceiling fan and light but the blades won't turn on their own. The motor hums and if I turn the blades to get it going they turn, but there is a hideous grinding noise as the blades rub against the light casing below. Is there any way to adjust the blades so it will turn...

Locked fan blades [ 5 Answers ]

I replaced the pull chain for my ceiling fan light. When I got everything wired and ready to go the fan blades were locked. I have checked the pull chain for the fan blades but nothing seems to unlock them. I can hear the motor running for the blades they just won't move. Any ideas?

?Hitting lefty and hitting against lefties. [ 4 Answers ]

I have trouble htting against lefties. I am a left handed batter and I am fine against righties, but against lefties I struggle. Do you have any suggestions? Thank you.?

View more questions Search